DMX – Lightoscope

20A*12ch Relay Switch Controller EUR1220

אמארה — Mon, 28 Apr 2025 10:42:52 +0000

The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below)

20A*4ch Relay Switch Controller EUR0420

אמארה — Sun, 27 Apr 2025 08:44:27 +0000

The product adopt advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol ,and EU-BUS protocol developed by EUCHIPS, output 4 relay switch signal and their synchronous 0-10V DC control signal. The max current of each channel of relay switch is 20A,the total 4 channel is 80A , the max current of each channel of 0-10V is 20mA.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below)

5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405

אמארה — Wed, 09 Apr 2025 11:41:25 +0000

The product adopts advanced MOS-FET control technology, can accurately realize the phase cut function, and has no requirement for the type or capacity of load. The compatibility is far superior to leading edge controller.
Control mode of EUMA0405 is flexible, which complies with 4 control protocols:
1- support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access KNX, Dynalite, Lutron, Crestron, LDS and other intelligent dimming network via gateway.
2- support EU-BUS lighting control protocol developed by EUCHIPS. It can be used with relay switch controller, clock module, panel module, sensor module to achieve the group and scene control through the Euchips9 PC software. This solution is widely used in the family, conference rooms, hotels, schools, and other occasions.
3- support Touchdim, manual control, timing control function (optional).The user can manually turn ON/OFF or dim the brightness.

DMX Touch Panel DMX-E07

אמארה — Tue, 08 Apr 2025 10:04:59 +0000

5VDC DMX Live And Stand Alone Controller DMX-X02

אמארה — Tue, 08 Apr 2025 09:51:21 +0000

DMX-X02 is a full-color LED DMX control system which focuses on indoor and outdoor decorative lighting, which can be used stand alone or with computer. It comprises scene-edit software. You can edit various lighting effects by downloading the programme which editaccording to your special requirement from your PC.This control system can fulfill 256 grey levels for each R,G,B color,totally 16.77 million real full-color. The software has been developed specially for architectural lighting and features easy to use effects which can be dropped onto timelines, along with multi-zone and synchronization allowing you to program a project with multiple rooms and areas with ease.

350/500/700mA*8ch DMX512/RDM Constant Current Decoder PX708

אמארה — Tue, 08 Apr 2025 09:17:29 +0000

12-24VDC 8A*4ch DMX512/RDM RGBW Decoder PX0408

אמארה — Tue, 08 Apr 2025 08:44:59 +0000

Welcome to the PX series DMX512/ RDM decoding drive. The PX series adopts advanced microcomputer control technology, and converts the widely adopted DMX-512/1990 and RDM/2009 standard digital control signals into analog control signals. 1-4 output channels can be selected, and 256-level control levels can be implemented for each channel. The invention can be used for the connection of the computer digital output light-adjusting table and the analog silicon box, and the use occa sions of the control of the LED lamp for the building and the lamp decoration.

1. The product has 4 channels output. The maximum 8A current per channel and the total power up to 768W.
2. Set the address with the dial switch, and the operation is simple and quick.
3. Euro terminal blocks and RJ45 two DMX interfaces are provided to improve signal transmission efficiency and anti-interference capability.
4. With the RDM remote management protocol, the RDM master can browse and set the parameters, the DMX address modification, the device identifica-
tion and other operations through the RDM master control.
5. It has the functions of short-circuit, over-temperature, overload automatic protection and recovery.
6. Fast self-test function.

DMX Touch Panel DMX-E05

אמארה — Tue, 08 Apr 2025 08:00:46 +0000

RGBW 16ch 4 Zones 4 Scenes DMX Touch Panel Controller DMX-E03

אמארה — Tue, 08 Apr 2025 07:52:29 +0000

DMX512 1024ch DMX Live & Stand Alone Controller DMX-P08

אמארה — Tue, 08 Apr 2025 06:49:25 +0000

DMX-P08 is a full-color LED DMX control system which focuses on indoor and outdoor decorative
lighting, which can be used stand alone or with computer. It comprises scene-edit software.You can
edit various lighting effects by downloading the programme which edit according to your special
requirement from your PC.This control system can fulfill 256 grey levels for each R,G,B color,totally
16.77 million real full-color.The software has been developed specially for architectural lighting and
features easy to use effects which can be dropped onto timelines,along with multi-zone and
synchronization allowing you to program a project with multiple rooms and areas with ease.